Price includes Postage and GST charges.
Here we have a service light kit that has been designed for under bonnet lighting on for the 2021 Isuzu Dmax.
You could use it for other vehicles, it has just been designed to suit location holes on the 2021 dmax.
The kit includes.
. X2 led lights
. X2 custom made rubber grommets
. Pressure switch
. Location spacer and hardware.
NOTE: The kit is does not include the wiring/ inline fuse or connections.
You will need in addition to this kit
-positive/negative cable approx 2m.
-12v connectors or soldering.
Video link below.
.Fit the 2 rubber grommets to the existing round bonnet holes as per our photos.
.Feed the cable from the led light through the grommets and out the next hole.
.Push fit the LED lights using a small twisting motion.
.Continue to feed cables inside the bonnet from the driver's side towards the passenger side Led until you reach the exit whole you would like to use. We chose the last oval whole on the passenger side,
.We chose to join the 2 sides together here via soldering. And added a bit of conduit and directed with the windscreen washer hose along side the bonnet hinge.
. You can choose to run the Red positive wire to the battery, with the addition of an inline fuse.
Or you could choose to piggyback fuse for headlights/ Drl or even the addition power section in the fuse box.
.The negative wire will go to the pressure switch supplied
.Time to use the R&R location spacer and mount the pressure switch in the blank oval hole in the front support panel. as per the photos in description.